Pirates

Set Review - #10320-1: Eldorado Fortress - LEGO Icons - 18+

Pirates!!!!!!!!!! Actually this one should say Imperials!!!!!!!!!!! First time we’ve had new Imperial Soldier minifigures in a while. This set is a re-make of #6726-1 from 1989. It is #10320-1: Eldorado Fortress. It contains 2,509 pieces and retails for $214.99 in the US. This works out to $0.086 per piece which isn’t too bad. The release date in the US was 4 July 2023 and it’s still available at the time of this post.

The box is in the old school style of boxes similar to #21322-1: Pirates of Barracuda Bay and #10305-1: Lion Knight’s Castle. The front has the yellow stripe in the upper left with the set name. and then a full picture of the set. The back has various scenes of the build with a map background.

Here are a few pictures on the sides of the box. One shows all of the minifigures and the monkey. Another shows the set and how it is modular so you can connect the pieces in different ways to change around the fortress.

The set contains 10 sets of numbered parts bags with most numbers having more than one bag. There is an unnumbered bag with some larger plates. You also get the instructions in a paperboard envelope and an envelope with the sails. I had one sail with a slight fold in it, but I was able to undo the fold without any issues. They showed up in good condition otherwise.

There are four instruction booklets in this set. The first booklet contains some information about the set to include history of the Pirates line and the old set and how some of the previous sets inspired this set.

The first bag builds a row boat for the pirates and includes to pirate minifigures. One minifigure is a female and the other is a male. You also build a small ship. This ship is modeled after the ship from #6277-1: Imperial Trading Post that was released in 1992. The ship comes with a female officer figure. The tricorne hat has long hair attached to help show it’s a female.

Bags two and three start the base of the first section of the fortress. Unlike the original version which had a large baseplate to build on, this set connects numerous plates as a base and then you build on top. This does mean you connect a lot of dark grey pieces to get the side of the fortress and its textures, but you also get the sea color and land colors separated versus the single colored base plate. The second bag builds a ramp which was just part of the printed baseplate on the original set. I like how this was done to achieve the angle and to capture the look of cobblestones.

I failed to get a picture after the fourth bag, but bag five wraps up this section of the build. You add a palm tree, an entryway with doors, a stand for a cannon on the upper level, an office for the governor, and you get a large Imperials flag. There’s also another section that is lower with another cannon that can be rotated. Behind the walls is a small stove and clips to hang numerous extra weapons.

The set has a bunch of hidden sections to include a small container with a printed 1x2 tile letter piece and a barrel with coins in it. The coins are 1x1 round printed tiles versus the old gold coins LEGO used to produce (which were much cooler in my opinion).

The sixth bag adds another section. This one is also three stories. The lower level is a cave section with wine barrels above an empty treasure chest. The tapped barrel leaked some with the small 1x1 tile that is partially rounded to be the “drop” on the floor. The next level contains a small space where another barrel is stored (empty), and sack of loot, and a broom. There’s a ladder here that goes up to another cannon. There is also a parrot included in this section.

The front of this section contains two palm trees and a small sandy beach.

This bag came with a soldier. It’s a female soldier with a rifle and back pack of gear.

The seventh bag builds a dock section. The dock has four supports that can then be connected to the rock section which can connect to other parts of the fortress. The top of the dock has a small table with seats. The table has a few bowls, cups, a glass bottle, and a lamp. Built into the dock is also a trap door. There is a Technic built mechanism that lets you slide a piece over and the trap door opens up with gravity. Two minifigures come in this section. One is another female officer. She doesn’t have a weapon, but there are plenty of others to give her in the set. The other is a male soldier. He is similar to the last one only he has a mustache. Lastly, you get a small monkey in this set. I liked the original ones from back in the day with the minifigure hands, but this one works too.

The eighth bag builds another section. This one is most notable for the crane on top. The crane section spins around 360 degrees and can raise and lower the cargo. This section of the build comes with a chest with pistols. The instructions say to put two pistols in, but my set came with three pistols so I included them all. There’s a ladder up to the top level with the crane, but I’m not sure how a minifigure can get to this crane given it’s size.

The mid level of this section has a walkway and storage area with another empty barrel, a bag of loot, and some extra cannon shells (1x1 round bricks). Below this level is a tunnel section with water flowing through.

The ninth bag starts the last section of the fortress. You build the rock section over water with some hidden compartments. There is a trap door over a section with some gold bars (1x2 tiles) and a sack of loot. There is also a pathway with a pirate skeleton. Not sure how he got stuck in there or when. Also there is another trap door which ends up being a trap door in the prison cell to escape.

The last bag adds the top section to the ninth bag. This includes a prison cell with some straw on the floor. There are also a few windows with a cool roofing technique using some rounded parts. There is a ladder on the jail cell to allow soldiers to climb up above the cell.

Here are the minifigures minus the skeleton (which I forgot to take out of the build for the picture). You get three soldiers (two male, one female), two female officers, a male governor minifigure, and two pirates (one male, one female). Along with the skeleton, monkey, and parrot, there are a decent number of characters in this set. For comparison, #21322-1: Pirates of Barracuda Bay had eight pirate minifigures and two skeletons. This set has eight minifigures and one skeleton.

Here’s the final set arranged how I decided to arrange it. I like the modular option for this set where you can connect it how you want or split it apart as desired. It also allows you to add on other sections as you want since there are numerous openings to expand. I had a few Pirates and Imperials sets back in the day and it was fun to see these return. The price point is fairly reasonable. I would have preferred $200, but I understand LEGO is adjusting for inflation I recommend this one to adults looking to relive their childhood or to kids interested in playing with LEGO Pirates as there are a lot of great play features. Look for opportunities to pick this one up with double VIP points or interesting GWPs.

Happy building!

Another Set From the Pirates Theme to Build

It’s been out since 4 July 2023 and I broke down and put my order in for it. Yesterday, #10320-1: Eldorado Fortress arrived at my home. I didn’t have the original set from back in the day, but I did have some of the smaller Pirates sets and I enjoyed playing with those as a kid. I’m looking forward to building this one and maybe even pulling out my #21322-1: Pirates of Barracuda Bay set, rebuilding it, and making a Pirates scene. I won’t do my full review yet, but I’ll give my first impressions. I like that the box has a similar look to the sets from the 1980s and 1990s with the yellow stripe saying the set name in the corner. I’ve seen a few folks say they are disappointed to not have the raised base plate like the original set. I’m okay with not having it. I’d rather have the pieces.

There are a bunch of great looking minifigures too. I’m glad to see the return of the Imperial Soldiers and to get some new ones to include females. I haven’t opened the box up yet, but from the box pictures, it looks like there are two female officers and the tricornered hat has hair attached which is cool.

The other one listed is shown on BrickSet.com as the Imperial Soldier, Governor. I never had one of these as a kid so this is a fun addition.

I’m looking forward to the build and the completed product. Now I just have to find the time to put it all together.

Have you built this one already? What was your take on it?

Happy building!

Set Review - #31109-1: Skull Island - Creator 3-in-1

Here is the last review for #31109-1. The Pirate Ship is here and the Pirate Inn is here. Skull Island is the smallest of the builds and I found there were a lot of pieces left over when it was complete. The design includes a brick built raft, a brick built row boat, and then the island itself. The island includes a brick built palm tree and a brick built monkey. The skull itself protects a pirate treasure of gold coins (1x1 round plates) and the treasure chest. The skull is mounted by a Technic axle and you can spin a wheel to have it move up and down. It doesn’t move much, but it would scare away anyone trying to steal the treasure.

The pictures below include the front and the back of the build. Overall, I think the skull could look slightly more realistic, but I guess that’s what is left up to the builder to adjust as required. The three builds for this set are all great and I could see wanting to keep all three assembled (I don’t plan to buy two more of these sets). They all would be a great part of a pirate scene or layout.

I haven’t bought a 3-in-1 set in a while, but this one was definitely worth it. I highly recommend this one… especially if you can find it on sale like I did. The builds are great and the pieces available are useful in other builds.

What are your thoughts on this one? A great addition for your Pirates or a lame attempt?

Happy building!

31109_skull_island1.jpg
31109_skull_island2.jpg

Set Review - #31109-1: Pirate Inn - Creator 3-in-1

This is part two of the set review. You can see part one here. I built the Pirate Inn after the ship just based on how the instructions are set up. The ship is first and you build it following numbered bags. Then the inn is next. You had to take apart the ship first to get all the pieces. It then takes a bit longer to build as you aren’t building by bag, but searching for pieces through the 1,264 available. I could have made it easier by sorting the pieces first, but what’s the fun in that?

I didn’t take pictures of the build process, but instead included a few pictures of the final build. It appears as though the ship was designed first and then the designers figured out what they could build based on the pieces available. Or maybe the inn was designed already and they just had to tweak it for parts availability. Either way, you will have a bunch of pieces leftover when the inn is complete so don’t fret.

Here’s what you get at the end.
-the inn
-a brick built horse and cart
-the same 3 minifigures only one now has an accordian
-a brick built bird on the top of the inn

31109_pirate_inn1.jpg

The build has some interesting features. The front has a small crane that you can crank up and down. I’m not sure what you’d use it for, but it’s a cool looking feature. The crow’s nest is on top so you can look out or maybe someone sleeps there?

I don’t know my styles of architecture, but I like the front façade of the inn. The angle of the roof, the windows, and colors all seem to make it fit right in with the pirates theme. The V roof in the front left of the house is made by connecting plates to ball and hinge joints. I had never seen that method of build before and I like how it was done.

The back of the inn folds out so you can have access to it. There are 3 beds on the upper level and then the lower level has a table and some cups for beverages.

Outside is a large wheel which I assume is a water wheel. It spins either by you rotating the wheel itself or by spinning the Technic pin that is inside the inn. You could hook it to a motor if you really wanted to. This feature would help you build out this set to connect it to a stream running down from a hill/mountain and meeting the bay that the inn overlooks. And in the bay would be a pirate ship… and you’d have to buy another set #31109… and LEGO continues to make money…

31109_pirate_inn2.jpg
IMG_1467.JPG

Last shot is a closer view of inside the inn. I’m not sure what the build in the center on the ground floor is. Maybe a clock?

Overall, it’s a good build with some good techniques. Since it is limited by parts, a few of the steps don’t make sense like using three 1x1 pieces versus a 1x3. I get why it’s done that way so not a major complaint. Along with the ship, this build would fit well with any pirate scene and is a welcome addition to the slight come back of the LEGO Pirate theme through other themes.

Onto the third build… Skull Island…

Happy building!

31109_pirate_inn4.jpg

Set Review - #21322-1: Pirates of Barracuda Bay - Build #15 - Ideas

I reviewed the first part of the build up through bag 14 here. It included everything to build the pirate ship turned living quarters set up which was very impressive. There is one more bag that comes with the set (#15) and it helps you convert the set into a ship.

The instructions start with removing a lot of pieces. You take off the plant life and some of the boarded up parts of the ship. Then you fix up some of the windows. Next it is the sails which look great when unfurled! Then you can add some containers for supplies and done. It didn’t take too long to make the conversion.

I put the minifigures on the ship and added the cannons for fun even though they’d probably be below decks. For the pictures I included the row boat and the shark.

Looking down from the top, it’s a pretty large ship.

21322_15a.jpg

Here’s a side shot. The ship is made up of the three sections, but it is pretty sturdy to pick up and move. Between the Technic pins and ball and joint clips, you also add a few plates/tiles so help secure it. Having some of the strings are a nice touch to make it look like you have some rigging for the masts. I was glad the string has studs on either side and we didn’t have to tie knots or anything.

21322_15b.jpg

One last picture from a forward angle. The downside is the sails only have the color on one side. It looks great from the angle pictured, but from the other side it doesn’t look as good. Not a huge issue, but a bit of a nit pick.

Now I just need to decide how I want to keep the set. Should I have it as a ship or as the living quarters on the island? What are you going to do?

For now I’ll leave it as a ship for a reason you’ll see soon…

Happy building! ARRRR!!!

21322_15c.jpg

Set Review - #21322-1: Pirates of Barracuda Bay - Ideas

It’s the 30th LEGO® Ideas set and a throwback to the classic Pirates theme from the 1980s and 1990s… The Pirates of Barracuda Bay was released in the US on 1 April 2020. It contains 2,545 pieces, contains 10 minifigures and retails for $199.99. At that rate, it is $0.079/piece.

I recall playing with Pirate themed sets as a kid and this set played right into that nostalgia with similar minifigures, the skull and cross bone flags, and even the parrot. The front of the box is even designed to look similar to the original Pirates sets. The fan designer for this set is Pablo Sanchez of Spain and he had that same idea for this set where it would be a chance to highlight the past theme that he played with as a kid.

Before I move on with the review, you can see the LEGO® Designer video here.

Onto the review… as mentioned the front of the box has the Ideas branding, but also looks like the historical Pirates sets from back in the day. Awesome! The back shows some of the details of the set, gives dimensions, and shows that you can assemble the set into a ship.

21322_boxfront.jpg
21322_boxback.jpg

The sides of the box… the US version gives the French and Spanish names and includes a grouping of the minifigures.

21322_side.jpg
IMG_1243.jpg
21322_box.jpg

I counted 25 numbered bags labeled one through 15. There are three unnumbered bags and then two large axles not in bags. There is a 459 page instruction book. It includes info on the story behind the set, details on the fan designer, details on the LEGO® designers, details on the minifigure crew, and then the instructions.

21322_contents1.jpg
21322_contents2.jpg

The sails are included in a separate package, but mine was shoved in the bag. This didn’t seem to be a problem as you roll up some of the sails for the initial build anyways. Also, and I haven’t tried it yet, I read on another blog that you can use an iron to flatten out the sails when you want to attach them to the ship part of the build. I’d recommend placing a towel or another cloth over the top first before ironing just to be safe. I wouldn’t go super hot either. Has anyone tried this yet?

21322_sails.jpg

I’m not going to go into great detail about each bag, but I tried to put pictures of most of the steps in so you could see how it comes together.

Bag one builds part of the island and includes a small boat and Port (one of the Broadside Brothers). I like the new palm tree design which includes minifigure heads as coconuts. There are also a few brick formations which appear to be ancient native sculptures from whatever island the crew has landed on.

Bag two adds some decking and starts to assemble the first part of the ship (middle section). The ship comes with some large BURP type pieces (Google it if you don’t know BURP). While some may prefer to build out a ship, I’m okay with the larger pieces as it makes the ship structurally more sound in my opinion.

21322_build1.jpg
21322_build2.jpg

Next up is the interior of the center part of the ship. It includes a few beds, an eating area with some extra cups and bottles, and some candles for light. This bag comes with the first female member of the crew named Robin Loot. Back in the day they were full up male crews so I like the addition of female pirates.

21322_build3.jpg

Bag four finishes up the interior and mostly covers the top. It also adds some of the plants that have grown since the crew has been stuck there. The cannon port holes are now windows. It works for the island build, but it would have been cool to have enough cannons for the ship when you re-build it later.

Of note, there is a printed flag piece that says “Jose’s Inn” in reference to the fan builder’s father who introduced him to the Pirate theme back in the day.

21322_build4.jpg
21322_build4a.jpg

The fifth bag finishes up the center section of the ship. It adds the masts and rigging for the crew to climb up. I am a big fan of the large sized pirate flag. This section of the ship attaches to the island section and the set starts to come together. This bag also includes Jack “Dark Shark” Doubloons who is a small minifig (short legs) member of the crew.

No complaints so far and it has been a great set to put together. I sadly didn’t have a lot of time to sit and crank it out so this was built over a few days. I learned that this is not a set to pick up and put down multiple times. Easy to put back together though.

21322_build5.jpg
21322_build5a.jpg

The sixth bag builds the other part of the island with another palm tree, some decking, another crab, and a pig eating some 1x1 round plates. It also includes a shark which seems to match the design of the original sharks from back in the day.

21322_build6.jpg

The seventh bag finishes up the island portion. It adds some food storage with a baguette, some bananas, and a pineapple. It also includes some tools and extra oars. This bag includes a skeleton wearing the original imperial army hat who is hidden under one of the decks. The minifigure here is Tattooga according to the instructions.

On the building technique front, There is a wall built with a window and the builder angled the window so it is not square with the bricks. It is slightly angled and the spaces are filled in well with bricks. You can see the window in the second picture below.

21322_build7a.jpg
21322_build7b.jpg
21322_build7c.jpg

Bags eight and nine build the bow of the ship (front). It starts with a BURP piece and that is built up with some additional pieces to make it more ornate. The yellow railings with the black really make it stand out. An anchor is attached here and you can move it up or down which is a fun detail.

21322_build8.jpg
21322_build9.jpg
21322_build9b.jpg

The tenth bag finishes the bow with another mast, a parrot, the minifigure "Quartermaster Riggins, and a partial minifigure as the front figurehead. You get a smaller pirate flag on the top of the mast.

You also finally use up the last of the long Technic axles. This was a good thing as I was done digging through the box to try and find them.

21322_build10.jpg

Bags 11 and 12 build the stern of the ship. Bag 11 includes the pirate Starboard.

21322_build11.jpg
21322_build12.jpg

Bags 13 and 14 wrap up the stern build. This includes Captain Redbeard’s office which is rather ornate and includes a bust statue, a treasure chest, a fancy desk chair and desk, and a map. There is a fold down bed which doesn’t seem to fit with the rest of the office, but we’ll take it. There is another large pirate flag on the back of the ship which is great. Bag 14 comes with the pirate Lady Anchor. It adds a top to Capt Redbeard’s office and a door. The steering column is on top, but the wheel itself is dangled off the ship on the back. There’s also another cannon on this section of the ship.

21322_build13.jpg
21322_build14.jpg

And then you put the stern on the second island section and connect the two sections and it looks awesome! I will do a separate post for bag 15 and the ship, but up to #14, this was an incredible build. I enjoyed the techniques, piece usage, the creativity in some of the things hidden in the set, and the story behind the set. The set has a lot of pieces and the price per piece isn’t bad, but $200 is a bunch to spend on a set. I used VIP points I’d been saving up so it was easier to swallow the cost, but something to consider going forward (especially if you have your eyes on some of the other bigger sets recently released).

This set has a lot of potential for expansion, re-build, and adding to larger pirate scenes. Well done LEGO and thank you!

You can see my post on build 15 and the island hideout turned ship here. .

21322_14d.jpg

Out of Stock in the USA

Update to this Post Here

I think people have been building with bricks to pass the time during quarantine. Specifically, AFOLs with some money to spend.. A quick scan of the Shop @ Home website for the US shows a lot of sets “out of stock” across the board. I haven’t seen any reports from the LEGO Company about supply chain disruptions or changes to factory output. I assume there are a number of factors contributing to include physical distancing in factories, challenges in shipping and crossing borders, processing at distribution centers, and shipping to consumers. Has anyone seen any details? Or maybe just sales are higher than normal with people stuck at home looking for fun things to do?

Usually there is buying towards the end of life for a set by re-sellers on Bricklink or EBay (I am guilty here), but I don’t think that is the case here. The number of sets out of stock or back ordered are a bit high in my opinion.

From an initial scan this week, the Creator Expert line lists 19 sets total with only one known to be fully retired (#10243-1: Parisian Restaurant). Of the remaining 18, there are six sets shown as out of stock to include the latest modular #10270-1: Book Shop. Additionally, another five are on back order.

Some back ordered Creator Expert sets in the US

Some back ordered Creator Expert sets in the US

Or maybe it is just the big sets? #75192-1: Millennium Falcon™ and #75159-1: Death Star™ are both out of stock from the Star Wars™ line. #75252-1: Imperial Star Destroyer was listed as back ordered earlier this week, but is now back in stock. And this is just a few days before the big May the 4th sale.

star_wars.jpg

Scrolling around some of the larger sets, #75936-1: Jurassic Park: T. rex Rampage shows as back ordered while #71040-1: The Disney Castle shows out of stock. #71044-1: Disney Train and Station shows as fully in stock. #76139-1: 1989 Batmobile™ is also available.

More out of stock large sets:

-#71043-1: Hogwarts Castle
-#75810-1: The Upside Down
-#21318-1: Tree House
-#21322-1: Pirates of Barracuda Bay (possibly related to this being a hot new release)
-#21320-1: Dinosaur Fossils

sold_out.jpg

Meanwhile the Technic world is fully in stock with no problems getting #42083-1: Bugatti Chiron, #42100-1: Liebherr R 9800 Excavator, or the #42110-1: Land Rover Defender.

I fully admit that I’m guilty here as I added to the out of stock numbers by recently buying and building the #10270-1: Bookshop. Have you been a part of the purchases by buying any of the bigger sets?

Happy building!