Taj Mahal

Set Review - #71043-1 - Hogwarts Castle - Harry Potter

In 2017 and 2018, I tackled the two largest sets that the LEGO Group had to offer. First off was #10256-1 Taj Mahal, which at the time was the second largest set out there with 5,923 pieces. Then it was #75192-1 Millennium Falcon with 7,541 pieces. Well the previous #2 is now #3 and I got sucked into buying and building the new #2. Hogwarts Castle (#71043-1 ) has 6,020 pieces. It was released on 2 September 2018 or as can be seen below, it was put on shelves in LEGO stores on 1 September. The retail price in the US is $399.99 which works out to be $0.066 per piece.

I used some VIP points, bought during double VIP points, made sure there was a good free offer to go with a purchase over a certain dollar amount, and used EBates (to get $20 back at the time). Still not a cheap set, but not a bad way to get a substantial discount on it.

Below is the box the set came in (it had an outer box to protect the inner box). The tag says it was made in Mexico in August 2018. I bought it in November so it sat for three months after production.

71043_delivery.jpg
71043_production_tag.jpg
71043_shelf.jpg

Here’s what the set box looks like. The front shows the front of the set while the back shows the back of the set and some of the details inside the castle that are included.

71043_boxfront.jpg
71043_boxback.jpg

The contents included 37 numbered parts bags, 3 parts bag with larger pieces and BURPs, and a package that included the instructions and stickers. Some of the parts were in the separate white box shown while some were just in the main box. I’m not sure why they had that distinction.

The first instruction book had a write up about the design team, some info about designing the set, and info about the set designer and graphic designer. Definitely something interesting and out of the ordinary, but cool for a set to have.

There are 3 sheets of stickers. I’ve seen debate on some of the sites about whether to use the stickers or not. There are a lot and I don’t like stickers, but I decided to use them anyways.

The parts box, inside the set box, inside the LEGO big set box, that was inside the shipping box…

The parts box, inside the set box, inside the LEGO big set box, that was inside the shipping box…

Instructions

Instructions

Set contents

Set contents

Stickers

Stickers

The full build is built on two bases if you want to call them that. The first book completes the first base. The bottom portion contains a lot of the BURP pieces as well as a lot of slopes and cheese slopes to make the BURPs look like the bottom base of the castle. The whole assembly is pretty sturdy and it took some time to build as you really had to pay attention to where the cheese slopes went on which part of the BURP. Normally I can just complete each step and move onto the next one, but for this build I had to pull the pieces for that step and then build. That way I knew whether I had done everything for that step or not.

Here are two views of the build from the first instruction book below.

71043_part1a.jpg
IMG_7001.JPG

The bags for the first book also included the boats (pictured later). I did some Googling and it looks like the boats are used by first year students to cross the lake from the train station to get to the castle and then return to the train station. They are also used by graduating students. They first appeared in the book/movie “Harry Potter and the Sorcerer’s Stone.”

The first book also includes a minifigure for Godric Gryffindor (pictured later). He has the sword of Gryffindor and a wand. The set includes a stand that you build and put stickers on picturing the crest of each house at Hogwarts. That stand is easy to build and I like how they used the stickers to show who each of the minifigures are.

Finally, below the base built with the first instruction book is the Chamber of Secrets. It includes the entrance to the chamber and then the chamber itself with the basilisk inside.

The Chamber of Secrets

The Chamber of Secrets

The door to the Chamber of Secrets

The door to the Chamber of Secrets

The second instruction book finishes the first half of the build. It includes the Great Hall, the main tower, and the courtyard. The top also includes a bunch of dementors. It also includes the minifigure for Helga Hufflepuff.

The main tower (is there another name for it?) is built very similar to the building technique of #21309-1 NASA Apollo Saturn V. I’m not sure where, but I thought I saw a LEGO video somewhere where the designers of both sets shared building techniques with each other. Anyone know what I’m talking about?

71043_part2a.jpg
Inside the Great Hall

Inside the Great Hall

Moaning Myrtle’s Bathroom (top) Moving stairs (bottom) Professor Dumbledore’s office (not pictured above the bathroom)

Moaning Myrtle’s Bathroom (top)
Moving stairs (bottom)
Professor Dumbledore’s office (not pictured above the bathroom)

71043_part2b.jpg
Tower

Tower

Hungarian Horntail Dragon

Hungarian Horntail Dragon

The third book is the second part of the bottom base. It is very similar to the first base with a lot of BURPs and slopes to add detail. It includes the minifigure for Salazar Slytherin.

71043_part3a.jpg
Wizard’s Chess Board

Wizard’s Chess Board

The room on the left is the Room of Requirements and the room on the right is a Potions Classroom.

The room on the left is the Room of Requirements and the room on the right is a Potions Classroom.

The Flying Keys room with the broom to ride to catch the right key.

The Flying Keys room with the broom to ride to catch the right key.

The Mirror of Erised

The Mirror of Erised

The set includes a number of small builds within the larger set. I will go through them quickly here.

Boats for crossing the Black Lake

Boats for crossing the Black Lake

The Whomping Willow with the Weasley car. You can see my review of the Whomping Willow set here.

The Whomping Willow with the Weasley car. You can see my review of the Whomping Willow set here.

Hagrid’s Hut to include the garden with pumpkins and Aragog (the spider). You can see my review of the Aragog’s Lair set here.

Hagrid’s Hut to include the garden with pumpkins and Aragog (the spider). You can see my review of the Aragog’s Lair set here.

The set includes 28 minifigures. This includes 4 of the standard sized minifigures. The 4 minifigures are the namesakes for each of the houses of Hogwarts. From left to right they are Godric Gryffindor, Helga Hufflepuff, Salazar Slytherin, and Rowena Ravenclaw.

71043_minifigures.jpg

The remaining minifigures are microfigures. There are 24 for some reason my set had 36. The 4x12 plate was not part of the set, but I grabbed it from my spare bricks to put them on.

71043_microfigures.jpg

The fourth instruction book finished the build. As you can see from the pictures, there are a few additional rooms that get finished. The first is the school’s library. The picture I took gives a good view of how the designers gave the windows the stained glass look. Using 1x2 grills and translucent colored plates it gives the windows a pretty cool look. The next picture includes Professor Umbrige’s office from “The Order of the Phoenix” book/movie. It also shows the Defense of the Dark Arts classroom on the right side.

School library (top) with the Room of Requirements (bottom left) and Potions classroom (bottom right)

School library (top) with the Room of Requirements (bottom left) and Potions classroom (bottom right)

Professor Umbridge’s Office (top left) Defense of the Dark Arts Classroom (top right) Chamber of Secrets Warning (bottom)

Professor Umbridge’s Office (top left)
Defense of the Dark Arts Classroom (top right)
Chamber of Secrets Warning (bottom)

So here’s the final set (without Hagrid’s Hut and the Whomping Willow). Was it worth what I paid? Overall, I think yes. I enjoyed the build. It was challenging and fun. There are a lot of great pieces and techniques used in it. I was nervous at first that it would be all small pieces since it is at a smaller scale, but it thankfully is not all small pieces. The stickers were annoying, but not too bad and they do provide some nice details to the set. I think part of the argument is that each book/movie adds different parts to the castle and they weren’t all there at once (like Professor Umbridge was only in one book/movie). In my mind it’s all good. I’m not trying to build the Castle for a specific movie. I wanted to capture it all like the designers built it. So not a big deal. If you want to build the set by book/movie, then go out and buy 7 sets and use only the stickers that apply to each book/movie.

Will this set ever go on sale? Hard to say. Usually LEGO doesn’t discount the really big sets. Sometimes Amazon.com or Walmart will, but you have to be right on the site when they announce the sale to get it because everyone else sitting there and waiting will scoop it up. Using VIP points helped and getting double VIP points was good too.

In the end it was definitely worth the investment. Now I just have to figure out where to put it. Along with where to put the Millennium Falcon and Taj Mahal.

Happy building!

71043_final.jpg

Set Review - #10256 - Taj Majal - Creator Expert

To read the intro giving an overview of the set itself and to see the opening, go here:
PART 1

The first bag starts the outer portion on the Taj Majal.  The first picture is bag 1.  It's not a very complicated build and it starts what became a very repetitive build with a lot of techniques repeated over and over.

The second set of bags (second picture) starts the corners of the outer portion of the Taj Majal.  The rounded out portion is an interesting build.  It still uses the rectangular pieces known to LEGO, but it makes it round.  I think it's actually better that they used this method versus using some of the rounded pieces out now.

10256_bag1.jpg
10256_bag2.jpg

The third set of bags includes the last 2 pieces of the corners of the Taj Majal.  They are very similar to bag 2 only oriented the other direction.

10256_bag 3.jpg

Here are bags one through three assembled into the outer base.  

10256_post bag3.jpg

Bag four builds the minarets.  They are all built exactly the same and are fairly sturdy despite what I thought looked like a flimsy structure.

10256_bag4.jpg

Here is the construction so far after the fourth set of bags (and a good view out the window in my building area).

10256_post bag 4.jpg

Bag 5 is next.  At this point, you learn that bags 5, 6, 7, and 8 are exactly the same.  Sadly instead of enjoying the build here, I just wanted to finish it up.  I enjoy building, but would prefer to not repeat the same thing 4 times over.  Enough complaining... here you can see both sides of the build and then what it looks like standing up in bad lighting.

10256_bag5a.jpg
bag 5 b.JPG
10256_bag5c.jpg

And here are bags 5, 6, 7, and 8 in case you didn't believe me that they all looked the same.

10256_bags5678.jpg
10256_bag9.jpg

Bags 9 and 10 are the same.  As you can see by the base of them, they connect using Technic pins to the builds from bags 5, 6, 7, and 8 to make the inner portion of the Taj Majal that holds up the dome.  Here are some pictures of both sides of the build and then all four pieces.

10256_bag9 10.jpg

Here is the assembly of bags 5 through 10.

10256_bags5-10.jpg

The eleventh set of bags adds the roof portion to the center section of the Taj Majal and connects the inner portion together.  

The twelfth set of bags builds the small set of domes on the top or as I looked up they are called chattris.  It also adds the 16 or so tall towers around the edges.  From what I saw on the web, they are called guldastas.

10256_bag11.jpg
10256_bag12.jpg

Bags 13 and 14 build the center dome section.  It starts with the bottom section and the inner structure.  Then the dome is built and attached to the structure.  

10256_bag13.jpg
10256_bag14.jpg

Here is the final assembled version from a few angles. 

The negative sides of the build:
     -it was somewhat tedious to assemble some of the parts over and over again
     -there are a lot of white pieces, but when you see the piece count and then look at the bill
      of materials, it is rather unimpressive to see the variety of pieces and colors

Overall, it's a pretty impressive build once completed. Would I have purchased it if I hadn't had a lot of VIP points to help pay it down?  Probably not.  I don't think the build experience would have been worth the $370 plus tax.  So while I'm excited that LEGO is opening up the vault to bring back some older sets, I will look for opportunities to not pay full price for some very expensive sets.  What are your thoughts?

10256_final1.jpg
10256_final2.jpg
10256_final3.jpg

It Has Arrived! - #10256 - Taj Mahal

(see Part II of the review HERE)

The Taj Mahal was re-released on cyber Monday (27 November 2017) and I was awake at 5 AM to place my order.  While some may not be excited about it because it decreases the value of their new-in-sealed-box 10189 Taj Mahal from 2008, I am certainly glad to see 10256 out there and I hope to see even more in the future.  Maybe the Green Grocer or Market Street or even the Cafe Corner could be next?  This is just me speculating and wishing so don't go starting rumors.  I don't have any insider knowledge here.  With the re-release of the Millennium Falcon (#75192) as well this year, it makes me wonder if this will become a trend.

My plan is to do a review of 10256, but I expect it to take a while since it is so big. The set is 5,923 pieces (one more than 10189... it includes a piece separator).  At $369.99 in the US, it works out to $0.062 per piece which is a good deal in my books (it had better be for that amount).  I had a lot of VIP points and a gift card so I ended up paying $4.24 for my set (YAY!).

The set came in the box pictured below. I'm glad it did because this box took the brunt of the damage that came through the outside shipping box.  My 10256 box was pretty well intact when I took it out.  This is not the first set to have this shell box.  I reviewed the Porsche 911 GT3 RS #42056 and it had a similar box.  Also the NASA Apollo Saturn V #21309 has this protective box now.  The original one I reviewed did not, but I ordered some for my BrickLInk store and they have the protective outer shell box.

Taj Mahal box.jpg

The picture above shows a label on the bottom left.  I zoomed in and took a picture of it.  It shows that the set was produced in Mexico which, I'm not an expert, but I'm betting most US sets are from the LEGO factory there.  The other interesting thing I noted was the production date of 22 September 2017.  Considering a 2 December 2017 release in the US (okay, so VIPs could order on cyber Monday 27 November), that's pretty impressive that they can make them and have them ready to go in two months.  I'm curious to know the dates on other sets out there.  What was the production range?  And what is confidential about this?  Or is it that they didn't release it right away?

10256_tag.jpg

Here is the box to include the front and the back.  Nothing too out of the ordinary here.  I'm looking forward to cracking it open and starting the build.

10256_front.jpg
10256_back.jpg