The folks at LeLightGo reached out to me and asked if they could send me a light kit so I could review it on my blog. So here goes.
I was given a choice so I selected the light kit for #42083-1: Bugatti Chiron from the Technic line. In case you’re not familiar, you can see my review of the LEGO Technic set here (part 1) and here (part 2). Also, you can get up close and personal with a real Bugatti Chiron at that link (okay, maybe not super personal, but closer than I’ve ever been).
The company’s web site lists a UK address, but the shipment I received came from California. The box was roughly 6 inches long by about 5 inches wide and a little over an inch tall. It was labeled as the 42083 Classic Version.
The box just contains a bag with parts bags inside so I went to their web site. They have some general instructions for how to handle their kits under a section labeled USER GUIDE. I scrolled down and there were two instructions for set #42083. One was labeled as the “new version” and the other was just the number. As you recall, the box I received said “classic version.” I was a bit confused as to which instructions to use. I ended up opening them both and used the process of elimination to figure out what to use.
The box contained eight parts bags. One through six were labeled and then there were two others. One contained the battery container.
The build started with taking apart a few pieces in the front of the car to get to the headlights. Then you place an LED under each 1x1 clear plate. Having a wire in the way makes the connection not as solid, but it holds. You connect four LEDs on each side and then all of the wires run into the front trunk space.
The next build installs a light above the seats. This one has a wire that you then connect back to the front trunk as well. I didn’t do a good job making the connections tight so it is more obvious that I used a light kit here.
There are a number of connections in the back. You install one on the spoiler, one along the brake light, and then one underneath the car. The one on the spoiler was tough as the wiring had to connect down through the car to the bottom to make some additional connections to lead to the power connection in the front. The one along the brake light requires you to change around the build a bit. The kit includes some knock off pieces that you install so there is one clip on the back versus two. Then you tack on the two light strips. The strips are a little too long in my opinion so getting them to fit was a bit sporty, but I eventually got the fit to work. The lights on the bottom required removing some more parts, but I eventually got all of this to work.
Once the lights in the back are attached, you have a long wire that you run to the front of the car. From there you connect all of the wires together to then connect to the power source. I didn’t have the three AAA batteries required on hand so I connected the USB plug to a USB to American power cord adapter and…
I was shocked that it all worked on the first try. It was actually fairly easy to put together despite having never done a kit like this before. The front headlights really look awesome. I think the one above the seats is a bit bright, but it does the job of lighting the cabin. You can also see the red LEDs in the rear spoiler which looks pretty good.
I think the back looks awesome. The red LEDs along the brake lights looks great and the blue that shines down on the ground is a cool contrast from the red right above it.
Thanks to LeLightGo for sending this set for me to review. Overall, it was a good first experience at LED lights and I think it helps to make the Technic Bugatti Chiron look better. I have nothing to compare this to so I can’t say whether it’s better than other companies or not, but no big complaints on this one after I figured out which instructions to follow. This set would originally cost $48.99. As of the writing of this post, it’s on sale for $38.99 plus a buy one, get one 30% off sale if you buy another kit. If you’re looking to get a light kit, definitely watch for sales and opportunities to save some funds.
Have you used light kits before? What are your opinions? Have you used LeLightGo or others? Let me know in the comments.
Happy building!