How are we at the 46th set in the LEGO Ideas line? Where has the time gone? This one is #21338-1: A Frame Cabin. It was released back on 14 January 2023 in the US. It contains 2,082 pieces and retails for $179.99. That works out to $0.086 per piece which isn’t too bad. The set is jammed with a lot of details, but still has a lot of playability too. Plus it’s not just a front façade of a building like many sets are as the roof pieces come off for access if you want to play instead of accessing the back of the build. Before getting into the build, I thought this set would go well with #21318-1: Tree House if you wanted to build an outdoor scene or just a MOC of a scene in the woods. I’ll have to add that to my list of things to try someday.
Onto the review…
You get the standard box with the 18+ greebling and Ideas logos. The front shows the full set while while the back gives some additional details and dimensions.
The contents are 15 numbered parts bags with one unnumbered bag of larger pieces. A few of the numbers have more than one bag. You also get two instruction books in a paperboard envelope.
Here’s the envelope with the instructions and the two books. The instructions have some details on the designers, fan designer, and the model itself to read before you get into the build.
Bag one builds the base of the cabin and includes two minifigures.
Bag two adds in some tiles and studded tiles that end up as the front porch. You also add in some Thor’s Hammers for the masonry work in front of the cabin which is a cool building technique.
The third bag starts to pack in details. There is a small kitchen area with a sink, stove, extra wood to burn, storage for dishes, and then the start of some stairs. The other side of the room has a record player and a 2x4 printed tile that says “LEGO” as your floor mat. I believe this is the tile from #10290-1: Pickup Truck.
Bag four builds up the walls and support section for the second floor. The kitchen area gets a few more items to include a stove, chopping blade, and fire extinguisher. There are stairs put in above the kitchen area with a LEGO plate on a step for a minifigure to accidentally step on.
The other side adds in a guitar, shelving, and you can see a printed tile above the front door.
The fifth bag adds in tiles, jumper plates, and some plates as the outer siding of the cabin. Some are offset and they aren’t in any particular order which helps to make it look more like a cabin in the woods than a manufactured building. The front side of the cabin gets one of the newer butterfly pieces above the front door which is a nice addition.
Bag six decks out the front porch with a rocking chair, a small stove to fry an egg, steps up to the porch, a small bench with a lantern and mug, and railings for the porch. Then in the back you get a shower, bathroom materials (shovel, toilet paper), and what appears to be gas hookups for the stove (maybe).
Bag seven adds a tree which comes with a small storage area for extra logs to burn and a bucket with tools. The coloring of the tree is fun with the yellows and reds of a fall like tree. This section can connect to the main cabin with a small Technic axle into a Technic pin hole. This allows it to stay there, but it can easily be removed and placed elsewhere as we’ll see later. This section comes with a small blue bird to sit in the tree.
Bag eight builds the second floor which is a small sleeping area with a bed. It still has a bunch of details to include a book shelf, a map on the floor and some lamps.
Bag nine attaches the second floor to the first floor, adds the siding to the upper level similar to the lower level, puts a peak on the roof, builds up the chimney from the stove, and adds in a little more detail on the second floor.
Bags 10 and 11 build the large sloped roof. Each side is built the same per the instructions (if you want to follow them). Both come with a skylight and a printed tile with wood grain. Bag 11 adds the tiles and studded tiles to finish out the roof and then each piece easily slides on top of the cabin. There aren’t any actual connections which is fine. Gravity keeps it on and I’ve been able to pick up the cabin and move it around without losing the roof.
Bag 12 builds another section of the build that can either be a piece attached to the corner of the cabin or placed separate. It starts with some greenery, a small stream section, and a rock piece. These pieces are assembled with some various plant pieces around them. There is also a small… um… animal… it’s not a squirrel… is it a woodchuck? rat? I’m not actually sure. The set comes with birds and a spider… but I’m not sure on this one.
Bag 13 assembles the stems and branches of the two trees. They are built in a similar fashion, but you can change the angles as desired to make them look different.
Bag 14 adds leaves/color to one of the trees. You get some great fall colored pieces to fill out the tree on this one. There’s dark orange, yellow, gold, and a bright yellow. They make a pretty good color combination for my untrained eye.
Bag 15 puts greenery on the second tree with sand green, dark green, and an olive type color. I like how all three trees in the set have different colors. You can obviously change them as you want, but I just followed the instructions. I’m also a fan of the wildlife with a red bird and butterfly with these two trees.
Below the trees you get a spot to rest the canoe on some Technic parts. Underneath is a crate with some life jackets and a bottle of some sorts. There’s a barrel to the side of the one tree where you can place the oars.
This set comes with four minifigures. I don’t think any of them are unique or have any rare attributes, but they’re a good mix for this set. I’m okay with four adult minifigures versus including minifigures with the kid legs.
Here are some pictures of the final build with the different tree sections attached and then separate. Overall, this was a great build. I enjoyed assembling the set between the different build techniques and all of the little details. It wasn’t super hard to assemble, but it also wasn’t just stacking bricks on top of each other which was good. You get a lot of great pieces as well if you like to break apart sets for MOCs. Lots of printed pieces too and no stickers which was a bonus. I would price this set around $160 instead of $180, but look for opportunities to get it with gifts with purchase or double VIP points or on sale at some other retailer if you can find it on discount.
Another great addition to the Ideas line in my opinion. What did you think?
Happy building!
