Continuing on with the 2021 Harry Potter line… Set #76393-1: Harry Potter™ and Hermione Granger™ was released 18 April 2021 in the US. It contains 1,673 pieces and retails at $119.99 in the US. That works out to $0.072 per piece.
This is something new for LEGO and the Harry Potter line and it’s been cool to see LEGO branch out a bit in this line. In 2020, we had #75979-1: Hedwig which was a larger scale model of Hedwig the owl with a crank to move his wings. This was repeated in 2021 with #76394-1: Fawkes, Dumbledore’s Phoenix. Now we also have some larger scale minifigures.
Looking at the box, the front shows our to large scale minifigures with Harry and Hermione. You can see on the front that their parts move similar to a normal scaled minifigure. Looking at the back, it demonstrates that the legs and arms can be moved and they can “sit.” Both figures come with a wand that can be removed. The dimensions are also listed on the back with Harry being 10.4 inches tall and 6.8 inches wide.
The contents are 12 parts bags numbered one through eight. There is a package with the two instruction booklets and then a package with Harry’s cape. For some reason Hermione doesn’t have a cape. I’m not sure why they did for Harry, but not for Hermione.
Of note, this build is a good family build or one to do with a friend. The Harry figure uses instruction booklet one with the bags numbered one through four. The Hermione figure has a separate booklet and uses the bags numbered five through eight. My family split it up. I built Harry while my kiddos found me the pieces. My NLS built Hermione.
The first bags build Harry’s torso. The outer picture doesn’t really capture the build as the inside has a lot of Technic pieces to achieve the angles of the body and to allow for the arms and legs to attach and pivot. It’s not super hard, but I can see why it is labeled as 10+ as you have to pay attention to where everything goes.
The second bags build both of his legs, his arms and hands, and his wand. The legs are mostly stacking bricks until you get to the attachment to the hips. The bottom is hollow, but you can still attach them to normal studs. The legs are built similar only opposite so you can get left and right. The arms are built in a similar fashion as well, but also in an opposite way. The arms pivot around and the hands spin like a minifigure too. The hands are built with a skin toned color that I can’t say I have seen often in sets.
The wand isn’t too sturdy if you handle it a lot, but it holds up as a display model. For fans, there is a small rod piece inside to be the wand’s “core.” This is a nice detail I think to make the Harry Potter fan base happy.
Bags three and four build Harry’s cranium. I opened them both up at the same time which probably wasn’t smart, but I managed. The head was a pretty challenging build with a lot of SNOT connections and slopes and curves to make his hair. As my NLS said, “does it matter if you don’t follow the directions and his hair is slightly off?” Well no, but you definitely have to pay attention to make sure everything connects. Harry’s face is printed along with his scar that is also printed on a curved piece. I went a little fast through the build and missed a key step that held together the main substructure of the cranium. I caught my mistake and it went better after that.
Harry has a round brick on the top of his torso. The head fits on top. You have to make sure it lines up just so, but after that it works okay and you can spin Harry’s head all the way around.
The fifth bag starts the build for Hermione. Her torso is very similar to build as Harry only a few of the colors inside are different.
Like the second set of bags, the sixth set of bags builds Hermione’s legs, arms, and her wand. The legs are also built the same way only she has some grey socks on her legs. The arms are also gray as she is not wearing the cape that Harry has. The arms and hands pivot the same way as Harry’s. The wand is built the same way as well and also has an inner core. It is just made of a different color than Harry’s wand.
Bags seven and eight build Hermione’s head and hair. The face piece is printed, but that’s it on the printed pieces. Still no stickers. YES! Here hair is pretty challenging if you follow the instructions to the letter as you need to make sure each curved tile, slope piece, and curved piece are placed the right way. While her head is also on a pivot, you can’t spin her head because her hair blocks her head from turning. Unlike a normal minifigure where you can pop off the hair piece, it isn’t as easy here. I don’t think this is a downside to the set, just merely pointing that out.
Here are the two characters sitting and then standing. Maybe navy blue wasn’t a good background for this photo. Sorry.
As my kiddo asked, where’s Ron? How come LEGO only built two of the three main characters? Will we see Ron in the future? Is this another ploy for LEGO to say “now you can build Ron on your own?” I don’t know. I’m sure the set would have been much more expensive with a third figure. Although sourcing all of the parts on your own probably isn’t cheap.
Back to the review, overall I thought this was a fun set. It worked out great to build as a family and it has some challenging parts for adults and easy parts for kids. My 7-year old built the wand and was able to help with parts of the torso and legs. Price-wise it’s not bad on a price per piece standpoint, but $120 might be out of reach for some. As a new concept, I like the idea of buildable minifigures. We’ll have to see if LEGO expands this to other themes like Star Wars, Ninjago, Marvel, or DC.
What were your thoughts on this one?
Happy building!
